Tuesday, January 19, 2016

Fun with Spooky Kooky jigglers! Playing "Hogan's Heroes".


Well, since I've got the serious business of documenting the history of Spooky Kooky jigglers out of the way, now it's time to have some fun with them.


What do you do when you're a kid, and "Hogan's Heroes" had just hit syndication on the local TV channel? (this was pre-cable TV) Of course, we were completely enamored by the hijinks of Col. Hogan and crew versus Col. Klink and the Germans.

We had Spooky Kooky jigglers, my Mom had lot of scrap cloth around the house, and my Dad had cardboard beer boxes, so we made outfits for the Kookys (some were the Germans, some were the Allies) and the beer boxes became barracks. We even made hollow tree stumps out of cardboard. Spent many, many hours playing "Hogan's Heroes" with them. Never took any photos, since "kids playing with toys" wasn't important enough for my parents to photograph (Sigh! All those missed moments!)

So, fast-forward to the year 1996, when reissue Spooky Kookys returned to the stores. I bought a few, but the most important ones, Kooky #5 [Boots] and Kooky #6 [Leaves] (who were the German officers) eluded me. Around Thanksgiving of 2009, after rediscovering them on the Internet, I found a set of 5 (new old stock) on ebay for $20.50. I joked around with my older brother about them, and then I realized I JUST HAD TO HAVE THEM.

So, here's a re-creation of the old days. My doll clothing-making skills improved vastly, and modern inventions like inket iron-on transfer paper made it possible to duplicate insignia. Sculpey (polymer clay) now comes in colors, and one can buy doll belt buckles in 5mm x 6mm sizes.

Here's the Germans:
Spooky Kookys as WWII Germans
And here's the Allies:
Spooky Kookys as the Allies
I've always been a fan of soft goods. It's a legacy of growing up in a time of Gi Joe, Gi Joe Adventure Team and MEGO's Action Jackson. Your action figure can be whatever you want them to be- all it takes is a change of clothing.

I'm really not overly fond of modern figures with all of their clothing molded and painted on. I feel that limits the imagination, and ties the figures to a specific character and franchise.

Just my opinion that hats, belts, jackets should be removable, and pockets, buckles, backpacks, holsters, etc. should be functional, not just an ultra-realistic, (sometimes) elegantly sculpted but non-usable hunk of plastic. That's why I enjoy replicating the concepts of the 1:6 world (Gi Joe) and the 1:9 world (MEGO) in the much smaller world of Spooky Kookys.


RELATED PAGES:
Imperial Toys Spooky Kooky jigglers, Part 1 
Imperial Toys Spooky Kooky jigglers, Part 2
Spooky Kooky Dungeon Dioramas
Imperial Toys Loony Kooky jigglers (1974)

Sunday, January 17, 2016

Imperial Toys Spooky Kooky oily jigglers a.k.a. Brabo (1971)


Updated: 02/12/16: New bootleg Spooky Kooky Knockoffs #6!
Updated: 02/18/16: Link to Part 2 of the Imperial Spooky Kooky story

These guys have always been some of my favorite toys. My Dad bought me 4 of these back in 1971. My brother also got 4 of them. I've been compiling information about Spooky Kookys for several years. After debating on whether this should be a Flickr album, standard webpage or blog, I decided to blog this.

SPOOKY KOOKYS- ORIGINAL 1970's RUN:

Spooky Kookys were small (about 4-4.5" tall), very flexible, rubbery oily jiggler monsters marketed by the Imperial Toy Corporation. They are also known as "forgotten prisoners" and "Brabo" jigglers, because of the word "BRABO" stamped into the bodies.

There were a total of six different figures. They were sold in multiple ways: in a countertop cardboard box, mounted on psychedelic-looking cards, or in gumball machines. Their original price was 39 cents, which was the cost of 3 comic books, or 3 candy bars in 1971. By 1975/1976, they went up to 49 cents. They had "HONG KONG" stamped into their feet, along with a circular logo and mold numbers.
Spooky Kooky on a 1975 card
from 1975 Imperial Toys catalog. Photo courtesy of Plaid Stallions

The Rogues Gallery: The Spooky Kooky Six

[Kooky #1] Prisoner, 2 bent legs, barefoot, hands connected with molded chain, tongue sticking out. Pants usually brown. Let's call him "Chains".
Kooky #1 [Chains]
[Kooky #2] Tallest of the bunch, skinny guy, one bent leg, one straight leg, barefoot, tongue sticking out. Pants usually green. Let's call him "Bloody Nose".
Kooky #2 [Bloody Nose]
[Kooky #3] Skeleton, pigeon-toed. Hands chained together with a molded hoop. Pants and vest usually red. Let's call him "Skelly".
Kooky #3 [Skelly] mid 70's partial paint variant
[Kooky #4] Bald guy with goatee beard. Barefoot. 1 leg attached to manacle. Shirt and pants usually brown. Let's call him "Goatee".
Kooky #4 [Goatee] My only surviving Kooky from childhood
[Kooky #5] Long nosed guy with jutting jaw. Wearing molded-on boots. Shirt and shorts usually green. Let's call him "Boots".
Kooky #5 [Boots] mid 70's partial paint variant
[Kooky #6] Small Jolly Green Giant guy with pointed ears and sharp teeth. Barefoot, hairy legs and arms, wearing cap and tunic made of leaves painted green. Let's call him "Leaves".
Kooky #6 [Leaves]
Most of these were molded in a pink/flesh color, with painted details. But, even back at the beginning of the line (1971) some of them were molded in a yellowish-brown color. My brother still has one of his:
genuine 1971 color variant Spooky Kooky
 
Known variant colors or paints:

Kooky #1 [Chains]: yellow/brown body/red pants
Kooky #2 [Bloody Nose]:
Kooky #3 [Skelly]:
Kooky #4 [Goatee]: (1) Green shirt & pants; (2) solid blue pants
Kooky #5 [Boots]: (1) yellow/brown body/red shirt & pants; (2) dark brown body; (3) dark brown shirt & pants
Kooky #6 [Leaves]: (1) red leaf tunic; (2) dark brown body;

MID 1970's VARIANTS

The original run was fully-painted.Within a few years, the factory in Hong Kong started to cut corners and left the shirts or other detailing of some of the figures unpainted. These are the most common vintage versions of the toys still available now. There is a surprising amount of new, bagged or carded stock that comes up on ebay pretty frequently. There must be a warehouse of unsold stock to explain this.

Kooky #1 [Chains]: Chain unpainted
Kooky #2 [Bloody Nose]: Unchanged
Kooky #3 [Skelly]: Vest unpainted
Kooky #4 [Goatee]: Shirt unpainted
Kooky #5 [Boots]: Shirt unpainted
Kooky #6 [Leaves]: Unchanged

Spooky Kookys were sold in stores as late as 1981 (with a different cardback, the "dungeon brick wall" one) and then they disappeared from the market.
1981 Spooky Kooky packaging. (photo from ebay)
Imperial Toys is still in business, although Spooky Kookys and all their other oily jigglers are long gone from their available toy lines.

1990's REISSUES- THE SECOND GOLDEN AGE

In the mid-1990's, Spooky Kookys made a surprise comeback. I found them for sale in a Halloween store, loose, dumped in a plastic cauldron for only 59 cents each (which is pretty good, considering inflation from 1971 to 1996). 

Only 4 of the original 6 were part of the mid-1990's reissues:

Kooky #1 [Chains] Pants usually blue, swirled with white. Hair painted dark brown. Chain painted brown.
Kooky #2 [Bloody Nose] Hair painted dark brown. Pants painted green, swirled with white.
Kooky #3 [Skelly] Pants painted brown, and vest painted red.
Kooky #4 [Goatee] Shirt painted brown, pants painted blue swirled with white. 
mid 1990's reissue Spooky Kooky
The 1990's reissues are slightly different from the 70's originals in these ways:
  • BRABO" word removed from the mold, although the original circular logo and mold numbers remained
  • "MADE IN CHINA" replaced the original "HONG KONG" stamps
  • Rubber goop used in the manufacturing is a little stiffer than the originals. They are paler in skin color than the originals, although they are still a "flesh"-like color.
  • Some changes in the painted color schemes. See fuller description above. The purpose of the white swirled paint was to make the clothing look more "worn" and "weathered".
mid 1990's reissue Spooky Kooky
    Note: Some sellers will scan the box and sell a Spooky Kooky in a homemade, miniature box. As long as they are advertised as such, that's perfectly fine. In fact, it's rather nice to have because the box graphics are so cool and wonderfully politically incorrect. Word to the wise: do not pay $140.65 for something like this. This is a reissue Spooky Kooky in a miniature repro box.

    example of reissue jiggler in repro mini box (photo from ebay)

    HOW MUCH ARE THEY WORTH?

    I tracked the sales of Spooky Kookys on ebay for one year (2013-2014) on an Excel spreadsheet and, in general, single Kookys still mounted on the card can sell for as much as $50, but if you shop wisely, you can get one for half that, or less. The skeleton appears to be the hardest one to find.

    Sets of 5 factory carded/bagged vintage 70's Spooky Kookys, (minus the skeleton), seem to appear reasonably often. $10-$15 for one figure, loose, in excellent condition is a fair price. $20-$25 for a carded one is a decent deal. Figures that are extremely dirty, broken, or missing arms/toes/ fingers should sell for peanuts, like $2, or maybe even $5 at most, if you're really desperate.

    Color variants, unusual versions and the original box would go for higher prices. They will sell for whatever the market will bear.

    The 1990's reissues should sell for lower prices. $20-$25 for the set of 4 is fair. The problem is that a lot of times, they're sold as "vintage" by sellers who can't tell the difference, or by uninformed buyers who *think* they're getting vintage, but instead, are getting something manufactured 20 years later. Painted dark brown hair, or clothing painted in a blue & white swirly pattern are dead giveaways. If in doubt, ask the seller to verify if the feet (or arm of skeleton) are stamped "HONG KONG" or "MADE IN CHINA".

    HOW DO YOU FIX THEM? 

    Unfortunately, Spooky Kookys, like all oily jigglers, are fragile. Kids would play rough with them (we did!), throw them against a wall, have them wrestle other figures, pull off fingers, arms, legs, toes. Kooky #1 [Chains] has a tendency of having his lower leg breaking off because of the sharp angle of his knee bend. Back in the day, we tried all kinds of things to repair them: rubber cement, contact cement, Krazy glue, stitching w/ thread and needle.

    However, the best, strongest and most permanent way to fix them is with heat. You can use a hot knife, which is like a woodburner with screw-on Xacto knife attachment. Plug it in, heat it up and weld the broken pieces together. The repair sets in seconds, and is as good as the original molding. You can even use a donor jiggler to use for parts repairs.
    Hobbico hot knife. Costs about 10 bucks.
    Since they're oily jigglers, sometimes you'll get a few that are slightly sticky or tacky. A gentle little bath with Dawn dishwashing liquid, a pat dry and a quick dusting of baby powder will take care of the stickiness.

     

    BOOTLEG/COUNTERFEIT/KNOCKOFF VERSIONS

    Believe it or not, the popularity of Spooky Kookys attracted bootleg/counterfeit/knockoff versions.

    KNOCKOFF #1:

    I was able to get two of these. 

    They differ from the originals by the rough casting quality, obvious mold separation lines, poor paint jobs, and the removal of the "BRABO" wording, circular logo and mold numbers. They still say "MADE IN HONG KONG".
    bootleg Spooky Kooky
    KNOCKOFF #2:

    A complete set of 6 vintage Spooky Kooky knockoffs had just recently come up for sale on ebay. These appear to have alterations to the actual molds to make them disturbingly different from the original Spooky Kookys. Several of them are distinctive because of the newly-added rubber hanging ring molded on the tops of their heads and the unusual color schemes.
    set of 6 Spooky Kooky knockoffs. Photo courtesy of retro.gal
    Kooky #1 [Chains]: mouth altered to remove tongue hanging out.
    Kooky #2 [Bloody Nose]: mouth altered to remove tongue hanging out, hanging ring added on top of head.
    Kooky #3 [Skelly]: mouth altered to be open, no teeth, length of backbone extended.
    Kooky #4 [Goatee]: shape of mouth changed, teeth removed, goatee beard removed, hanging ring added on top of head.
    Kooky #5 [Boots]: mouth altered to be open, hanging ring added on top of head.
    Kooky #6 [Leaves]: ears changed, jaw is now pointed, hanging ring added on top of head. 
    close-ups of knockoff Spooky Kookys. Photo courtesy of retro.gal
    KNOCKOFF #3:

    Every so often, a "mini Spooky Kooky" jiggler pops up on ebay. They're not perfect, scaled-down replicas of the originals. Instead, they seem to be resculpted 3" monsters, clearly reminiscent of Spooky Kookys, but not exact duplicates. Notice how the heads, legs and bodies were hybridized in a bizarre Frankenstein-type experiment.
    deformed mini Spooky Kooky. Photo courtesy of John Frick
    mini Spooky Kookys. Photo courtesy of John Frick
    The sellers usually note that these mini-jigglers have a tendency to harden from flexible rubber to a hard plastic, so they require carefully handling.

    KNOCKOFF #4:

    Bootleg versions of Spooky Kookys from Italy! Notice the soft-looking detailing and terrible paint jobs. The figures have no markings. These are believed to be resculpts from minor companies doing knockoffs.
    Italy Spooky Kookys. Photo courtesy of John Frick
     KNOCKOFF #5

    Not sure what to make of this. The molding and casting quality is excellent, but take a look at his legs! The head, arms and torso are Kooky #5 [Boots], but the legs and feet are from Kooky #6 [Leaves] with a lot of help from Nair hair remover. Such very silky smooth legs! Marked "HONG KONG".
    odd hybrid Spooky Kooky. Photo courtesy of John Frick
    KNOCKOFF #6

    Something new has just been posted on ebay- a 70's vintage gumball machine toy backing card with 4 Spooky Kooky knockoffs still attached, along with a plethora of tacky plastic treasures such as toy watches, rings, pendants and bracelets that only a kid with a dime could love. They look similar to Kooky #1 [Chains] and Kooky #5 [Boots], but smaller, about 2-1/2" in height.

    The card is dated 1978, Diamond Vending Supply Company, Inc.
    Fake Spooky Kookys on a vending machine card.
    Photo courtesy of Cees van den Hoek

    SPOOKY KOOKY RINGS

    I found a few Spooky Kooky rings at a novelty shop in 2013. The store owner told me that they were old stock that was sitting around for a long time. I bought every single Spooky Kooky ring she had in the store, as well as a few heads missing the ring band. I wanted them ALL. One of my duplicates sold for a very handsome price on ebay.
    1990's-era Spooky Kooky rings & ring faces (front)
    These PVC rings are marked "CHINA" and they are of extremely high quality. I had originally assumed they were of 1970's vintage, but the "CHINA" markings and some information from "Rebecca" on Flickr date these to the Second Golden Age of Spooky Kookys in the 1990's. The detailing and paint job is excellent, and the manufacturer of these rings clearly had access to the original Spooky Kooky patterns. These are not copies or recasts of the original jigglers, as the rings have better definition and crisper details, such as the forehead wrinkles and the noses.
    1990's-era Spooky Kooky rings (back)

    And, finally, we come to the current day. As late as 2013, the U.S. Toy Company was selling inexpensive sets of "one dozen Monster rings" for Halloween party favors. The set of rings just happened to contain an old friend: Kooky #4 [Goatee]! Or, at least, a modern-day version of him. The size is about right, but an examination of the sculpt shows that it is a very close imitation resculpt, not a cast from the original pattern. The pointed nose and mouth shape in the modern ring do not exactly match original jiggler, nor the 1990's-era rings. The paint job (using a spray mask) is not as good, and the back of the head is more hollow (saving plastic) and the ring band is of lower quality. 

    U.S. Toys no longer carries these rings in their catalog, unfortunately.
    2010-era Spooky Kooky ring sold by U.S. Toys

    So, that's it! 40 years of Spooky Kookys in a nutshell!

    The boxes and packaging of Spooky Kookys have a whole fascinating and sordid story to tell, and deserved their own page. Click this link to read it:
    Imperial Toys Spooky Kookys Part 2

    Special thanks to John Frick for sharing photos of his bootleg figures from his personal collection.

    Got additional information, or corrections, or photos to share? Write to me and I will gladly incorporate any new information in this blog!

    RELATED PAGES:
    Imperial Toys Spooky Kooky jigglers, Part 1 
    Imperial Toys Spooky Kooky jigglers, Part 2
    Spooky Kooky Dungeon Dioramas
    Imperial Toys Loony Kooky jigglers (1974)

    A Collection of Toy Skeletons
     

    Friday, January 1, 2016

    Polymer clay miniature coins for dioramas


    I've been stumped for quite a while about how to make authentic-looking doubloons for treasure chests. Originally, I used gold cardstock and punched 1/4" coins and stamped them by hitting them with a metal button and a hammer. But, the coins were thin, kept slipping out of the chest and didn't have the look or the weight of real coins.

    The main problem was how to do die engraving, and with what materials. I finally invented a method: using Instamorph Moldable Plastic for the dies (stamper) and Scupley polymer clay for the coins. Instamorph is moldable when placed in boiling water and hardens to a very durable plastic at room temperature. The die impressions were very simple:

    FANCY BRASS BUTTONS from the fabric shop!


    Button companies have already done the hard work by engraving the designs on the buttons. There's stars, sunbursts, anchors, crowns, heraldry shields, eagles, flowers, and all sorts of designs available. All you need to do is mold top and bottom dies using Instamorph and then press the button onto them while the plastic is warm. In a few minutes, the plastic hardens.

    Knead Sculpey until it's soft and then pinch off small amounts and roll into little balls. Flatten them slightly with your finger. Alternatively, the clay can be rolled into a sausage shape, and sliced. The slices would become the coins. Leave them on a cold kitchen countertop for a bit- cold Sculpey makes better coins. Then, place the Sculpey coin planchet between the two dies and press. Every so often, it's good to wipe the dies down with a drop of cooking oil and a rag to prevent the coins from sticking.


    There's a fantastic tutorial on "The Blue Bottle Tree" on the various methods of getting a metallic look on polymer clays: 


    It turns out that I already had all of the materials I needed, so I didn't need to go out and buy anything. I used the acrylic paint method and simply painted the unbaked coins, let the paint dry and baked them at the usual 200-250 degrees. They came out fantastic. The "silver" coins needed an additional step- a black paint wash to bring out the details and replicate the real patina on vintage silver coins.


    They are, on purpose, slightly irregular and sometimes crudely stamped, to emulate Spanish doubloons (pieces of eight) that are famous in pirate movies, books, stage musicals and Disney theme park attractions. Everybody loves pirates! In fact, this method closely resembles the real methods used in minting doubloons, aside from the materials.


    The end result is an amazingly good diorama piece that looks and feels far more authentic than toy pieces or decor stolen from aquariums.


    There are almost 400 coins in this picture!

    RELATED PAGES:


    Pirate Hats (for action figures) DIY Tutorial
    "Captain Bar" DIY Dollhouse becomes Pirate Bar